Infrared communication
Receiving data
1
z
2
3
4
Receiving all data
1
z
2
3
4
5
z
After the operation for receiving, the handset waits to
receive data. Infrared communication automatically
begins when data is sent from sender's device within
approximately 60 seconds.
z
Note that if you select [Save] when receiving all data,
all data registered to the target function are deleted.
z
Receiving all data may not be available depending on
the data type.
z
When available space in the save destination
becomes insufficient while receiving data, the data
being received to that point are saved and receiving
ends.
Selecting data and sending
1
z
2
3
z
4
5
159
Data communication
To Next Page
Loading...
