Sharp AR-M450 - Page 83

AR-M350 SIMULATIONS 10-22
<List of display values>
<List of display value>
<List of display values>
22-6
Purpose Adjustment, setup, operation data output, check
(print)
Function (Content) Used to print the list of adjustments and setup
data (simulations, FAX soft switches, counters).
Section
Item Data
Operation/Procedure the selected data is displayed on the menu box.
0 TRAY SELECT auto only (no selection)
1 PRINT START
22-7
Purpose User data output, check (display)
Function (Content) Used to display the key operator code.
(Used when the customer has forgotten the key
operator code.)
Section
Item Data
Operation/Procedure The key operator code is displayed.
SIMULATION 22-6
DATA PRINT MODE, SELECT SETTING,AND PRESS START.
0. TRAY SELECT :AUTO ONLY
1. PRINT START
1
SIMULATION 22-6
DATA PRINT MODE.. EXECUTING...
0.TRAY SELECT :
0
1
When "1" is selected,
press [START] key.
SIMULATION 22-7
KEY OPERATOR CODE DISPLAY.
CODE: *****
22-8
Purpose Adjustment, setup, operation data output, check
(display)
Function (Content) Used to check the number of times the staple,
and scanner (reading) unit were used.
Section
Item Counter
Operation/Procedure The counter data below are displayed.
SPF Number of times of document feed
SCAN Number of times of scan
STAPLER Number of times of stapling
PUNCH Number of times of punching
STAMP Number of times of SPF finish stamp
22-9
Purpose Adjustment, setup, operation data output, check
(display)
Function (Content) Used to check the number of times
(print quantity) of each paper feed section.
Section Paper feed
Item Counter
Operation/Procedure The counter data below are displayed.
TRAY1 Use quantity of tray 1
TRAY2 Use quantity of tray 2 (Multi purpose tray)
TRAY3 Use quantity of tray 3/LCC left tray
(Common to Desk/LCC)
TRAY4 Use quantity of tray 4/LCC right tray (Desk/LCC)
BPT Use quantity of manual feed tray
ADU Use quantity of duplex paper feed
SIMULATION 22-8
ORG./STAPLE COUNTER DATA DISPLAY.
SPF: ********
SCAN  : ********
STAPLER : ********  PUNCH : ********
STAMP : ********
SIMULATION 22-9
PAPER FEED COUNTER DATA DISPLAY.
TRAY1: ********  TRAY2 : ********
TRAY3 : ******** TRAY4 : ********
BPT : ********  ADU : ********
 ''       !"# $%&