Sharp AU-MP14 User Manual

[2] TEST MODE
1. AH-129
Keep pushing the "AUX." buttons and supply the power, the system will go to the test mode. In this mode, the output of operation is switched by
pushing the ""AUX." button in the unit or the "OI" button in the remote controller. Normal outputs are shown in Table.
STEP No.
OUTPUT "-" : NO CHECK, "O" : ON, "X" : OFF
BUZZER
FAN
MOTOR
LOUVER OUTDOOR
LED 101 LED 102 LED 103
LED 104
RED YELLOW GREEN
BLUE
STEP0
BEEP2
O *1O*2O
X
XXX
*1 : 7°C<(ROOM TEMP.)<42°C
*2 : -2
°C<(PIPE TEMP.)<45°C
STEP1
BEEP1
X X O
X
O OPEN O
STEP2
BEEP1
O RPM X O
X
O X X
STEP3
BEEP1
O *4 X
X
O X O
*4 : O --- POWER ON INVALIDITY
STEP4
BEEP1
O IC8 O O
X
O X X
*4 : X --- POWER ON VALIDITY
STEP5
BEEP1
OOO
X
OXO
STEP6
BEEP1
X R.C. X O
X
O X X
STEP7
BEEP1
XXX
X
OXO
STEP8
BEEP1
XXO
X
OXX
STEP9
BEEP1
O X O
X
O X O
STEP10
BEEP1
O O O
X
X CLOSE O
1. AH-MP14
STEP No. OUTPUT "-" : NO CHECK, "O" : ON, "X" : OFF
BUZZER
FAN
MOTOR
LOUVER OUTDOOR PLASMA
CLUSTER
LED 101 LED 102 LED 103
LED 104
RED YELLOW GREEN
BLUE
STEP0
BEEP2
O *1O*2O
O
XXXX
*1 : 7°C<(ROOM TEMP.)<42°C
*2 : -2
°C<(PIPE TEMP.)<45°C
STEP1
BEEP1
X X O
X
O OPEN O X
STEP2
BEEP1
O RPMO O
O
OXXO
STEP3
BEEP1
O *4 X
X
O X O O *4 : O --- POWER ON INVALIDITY
STEP4
BEEP1
O IC8O O
X
OXXX
*4 : X --- POWER ON VALIDITY
STEP5BEEP1 X O O X OXOX
STEP6
BEEP1
X R.C.X O
X
OXXX
STEP7
BEEP1
X X X
X
OXOX
STEP8
BEEP1
XXO
X
OXXX
STEP9
BEEP1
O X O
X
OXOX
STEP10
BEEP1
O O O
X
X CLOSE O X
12

Sharp AU-MP14 Specifications

General

Brand	Sharp
Model	AU-MP14
Category	Air Conditioner
Language	English