EasyManua.ls Logo

Sharp AY-AP18GR - Basic Operation; Selecting Operation Modes; Setting Desired Temperature; Setting Fan Speed

Sharp AY-AP18GR
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Press the TEMP. button to set the
desired temperature.
AUTO/DRY MODE
The temperature can be changed in 1°C
increments within the range of 2°C higher
to 2°C lower from the temperature auto-
matically determined by the air conditioner.
COOL/HEAT MODE
The temperature can be set within the
range of 18 to 32°C.
1
E-8
BASIC OPERATION
2
Press the ON/OFF button to start
operation.
The red OPERATION lamp ( ) on the
unit will light.
3
4
Press the MODE button to select
the operation mode.
AUTO HEAT COOL DRY
5
Press the FAN button to set the
desired fan speed.
AUTO SOFT LOW HIGH
In the DRY mode, the fan speed is pre-
set to AUTO and cannot be changed.
Automatic Operation
Mode
Temperature Setting
Below 21°C
HEAT 23°C
21°C-24°C
DRY
Room Temp. at start-up
24°C-26°C COOL
24°C
26°C-28°C COOL
25°C
Above 28°C COOL
26°C
Modes and Temperature Settings
Room temp.
at operation
start-up
TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature set-
ting and mode are automatically selected
according to the room temperature when
the unit is turned on.
To turn off the unit, press the ON/
OFF button again.
The red OPERATION lamp ( ) on the
unit will turn off.
1
4
5
2
3

Table of Contents

Related product manuals