ENGLISH
E-1
ENGLISH
This manual explains the proper use of your new air conditioner. Please read this manusl carefully
before using the product. This manual should be kept in a safe place for handy reference.
• IMPORTANT SAFEY INSTRUCTIONS ........ E-1
• ADDITIONAL NOTES ON OPERATION ...... E-3
• TIPS ON SAVING ENERGY......................... E-3
• PART NAMES............................................... E-4
• USING THE REMOTE CONTROL ............... E-6
• BASIC OPERATION ..................................... E-8
•
ADJUSTING THE AIR FLOW DIRECTION ......
E-9
• TIMER OPERATION..................................... E-10
CONTENTS
• TURBO OPERATION ............................. E-12
• ONE-HOUR OFF TIMER ........................ E-12
• PLASMACLUSTER OPERATION .......... E-13
• AUXILIARY MODE ................................. E-13
• MAINTENANCE...................................... E-14
• OPTION KIT ........................................... E-14
• BEFORE CALLING FOR SERVICE ....... E-15
IMPORTANT SAFETY INSTRUCTIONS
WARNINGS FOR USE
1
Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord
can result in damage to the unit and cause electrical shock.
2
Be careful not to expose your body directly to the outlet air for a long time. It may affect
your physical conditions.
3
When using the air conditioner for infants, children, elderly, bedridden, or disabled people
make sure the room temperature is suitable for those in the room.
4
Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of internal fans.
5
Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,
water pipe, lightning rod or telephone grounding wire. Incomplete grounding may cause
electric shock.
6
If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
immediately and turn the circuit breaker OFF.
7
The appliance shall be installed in accordance with national wiring regulations. Improper
cable connection can cause the power supply cord, plug and the electrical outlet to
overheat and cause fire.
8
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard. Use only the manufacture-
specified power cord for replacement.
WARNINGS FOR INSTALLATION / REMOVAL / REPAIR
• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric
shock, water leak, fire etc. Consult your dealer or other qualified service personnel for the
installation/removal/repair of the unit.
To Next Page
Loading...
