Care and Cleaning
at the circuit breaker
to prevent
the risk of electric shock.
pour or spray liquids directly onto the indoor or outdoor units for cleaning, to
prevent risk of electric shock.
Only wipe the
Rotate the front panel upwards in the direction
of the arrow. While holding both sides of the front
panel, remove by pulling forwards. Some minor
force may be required.
LCD display (if fitted) from the front panel.
Before cleaning, remove the
Align and insert the two support lugs of the
front panel into the slots, then rotate
downwards, as shown in the figure.
It is recommended to clean the filters every three months. More frequent
cleaning is required in dusty environments. After removing the filters,
take care to avoid touching the fins of the condenser unit, to avoid injury.
Cleaning the air filters
To Next Page
Loading...
Need help?
General
