All interconnecting wiring between indoor and outdoor unit must be performed by
a licenced electrical contractor in accordance with AS/NZS3000.
unit to
the
screws adequately to prevent loosening.
Ensure the electrical connections are properly earthed to prevent electrical shocks.
Ensure all wiring connections are secure and the cover plates are reinstalled properly.
Poor installations that allow dust or moisture incursion may cause fire or electrocution.
A circuit breaker of adequate capacity should be installed at the switchboard.
output
Nm
ensure the joint nut is adequately
tightened,
Installing the indoor unit
To Next Page
Loading...
Need help?
General
