EasyManua.ls Logo

Sharp AY-XP24PU - SELF CLEAN OPERATION; Mold and Moisture Reduction; Self Clean Limitations; DISPLAY BUTTON FUNCTION

Sharp AY-XP24PU
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN-14
SELF CLEAN operation will reduce the
growth of mold fungus with Plasmacluster
ions and dry inside of the unit. Utilize the
operation at seasonal change over terms
.
1
Press the SELF CLEAN button when
the unit is not operating.
The remote control will display “ ”.
(The “
” will disappear automatically in
1 minute.)
The blue PLASMACLUSTER lamp (
)
will light up.
The unit will stop operation after 40 minutes.
TO CANCEL
Press the SELF CLEAN button.
The blue PLASMACLUSTER lamp will
turn off.
NOTE:
You cannot set the temperature, fan speed, air
ow direction or timer setting during the SELF
CLEAN operation.
Mold fungus already grown can not be
eliminated by this operation.
SELF CLEAN OPERATION
1
Press the DISPLAY button when the lamps
on the unit are too bright. (The green OP-
ERATION lamp and the orange TIMER
lamp cannot be turned off.)
1
During operation, press the DIS-
PLAY button.
The blue PLASMACLUSTER lamp (
)
,
5°F/-15°C AUTO OFF lamp
and/or the
green FULL POWER lamp (
) will turn
off.
TO LIGHT UP
Press the DISPLAY button again.
DISPLAY BUTTON
1
Use this mode when the remote control is
not available.
TO TURN ON
Press the AUX button.
The green OPERATION lamp ( ) will light up.
The mode and the temperature setting are
automatically selected according to the room
temperature and the outdoor temperature
when the unit is turned on. The fan speed is
set to AUTO.
TO TURN OFF
Press the AUX button again.
The green OPERATION lamp ( ) will turn off.
AUX
AUXILIARY MODE
OM_AY-XPC5PU(A760)_EN-FR-ES.indb EN-14OM_AY-XPC5PU(A760)_EN-FR-ES.indb EN-14 10/19/12 5:42:37 PM10/19/12 5:42:37 PM

Table of Contents

Other manuals for Sharp AY-XP24PU

Related product manuals