Sharp AY-XPC15PU - Page 12

2 – 8
AY-XPC15PU
The air conditioner works at the maximum
power to makes the room cool or warm
quicker.
1
During operation, press the FULL
POWER button.
 The remote control will display “ ” and
AIR FLOW symbol will get longer.
 The temperature display will go off.
 The green FULL POWER lamp (
) will
light up.
TO CANCEL
Press the FULL POWER button again.
 The green FULL POWER lamp ( ) will
turn off.
NOTE:
 The air conditioner will operate at “Extra
HIGH” fan speed for 15 minutes, and then
shift to “HIGH” fan speed.
 You can not set the temperature or fan speed
during the FULL POWER operation.
The unit will operate at “Extra LOW” fan
speed for comfort and in need of quieter
operation.
1
During COOL, HEAT, and AUTO op-
eration, press the SILENT button.
 The speed icon on the remote control will
display “SILENT”.
TO CANCEL
Press the SILENT button again.
1
FULL POWER OPERATION
SILENT OPERATION
1
When the 1
.
2
.
3
.
5h OFF TIMER is set, the
unit will automatically turn off after the set-
ting hours.
1
Press the 1
.
2
.
3
.
5h OFF TIMER but-
ton to set the desired time.
 The orange TIMER lamp ( ) will light up.
 The remaining time will be indicated on
the remote control in 1-hour increments.
TO CANCEL
Press the SET/C button.
Alternatively, press the 1
.
2
.
3
.
5h OFF
TIMER button.
 The orange TIMER lamp ( ) will turn off.
NOTE:
 The 1
.
2
.
3
.
5h OFF TIMER has priority over
TIMER ON and TIMER OFF.
 If the 1
.
2
.
3
.
5h OFF TIMER is set while the unit
is not operating, the unit will operate at the
formerly set condition.
 If TIMER ON and/or TIMER OFF are set,
TIMER CANCEL button cancels every setting.
1
CANCEL
1
.
2
.
3
.
5h OFF TIMER
CANCEL