Sharp AY-XPC18ZU - MAINTENANCE; CLEANING THE AIR FILTER; MAINTENANCE AFTER AIR CONDITIONER SEASON; MAINTENANCE BEFORE AIR CONDITIONER SEASON


ENGLISH
Be sure to disconnect the power cord
from the wall outlet or turn off the
circuit breaker before performing any
maintenance.
CLEANING THE AIR FILTER
After 720 hours of operation, the
OPERATION indicator blinks (green

1
Turn off the unit.
2


up.
3

Use a vacuum cleaner to remove dust. If


shade before reinstalling.
4


hooks into the holes until match
each other.
MAINTENANCE
Handles

CLEANING THE UNIT AND THE
REMOTE CONTROL


on them. It can cause electrical shock
or equipment damage.

abrasive powders or strong solvents.
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Dry the inside of the indoor unit
thoroughly.
Run the unit in the SELF CLEAN
operation mode.
2
Stop the operation and unplug
the unit.
Turn off the circuit breaker, if you
have one exclusively for the air
conditioner.
3

it.
MAINTENANCE BEFORE AIR
CONDITIONER SEASON
1

dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.

clicks.
Hook
Hole
5
Hold down the ON/OFF button
on the unit for 2 seconds, after
2 seconds, a beep goes off,
then release the button within 5
seconds.
The OPERATION indicator on the unit will
stop blinking.
OM-B142 ZU A5 EN.indd 23 2022/7/22 10:59:27