12
BEFORE USING THE MACHINE
ADJUSTING THE VOLUME
You can adjust the volume of sounds generated by the machine. Tap the [Settings] key and configure the following
settings from the [System Settings] tab.
(Administrator rights are required.)
► SETTING MODE WHEN AN ADMINISTRATOR IS LOGGED IN (page 42)
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
For details, see the User's Manual.
Setting Settings
Sound Settings → Beep Sound Settings (Common) →
Scan Complete Sound (Image Send)
Configure settings for the sound that is generated at the
completion of scanning when using the fax, scan, document filing,
or other image send function.
Sound Settings → Beep Sound Settings (Image Send) →
Fax
For fax, configure settings for the on-hook (speaker) volume, ringing
sound, line monitor, reception completed sound, sending completed
sound, and send/receive error sound.
Sound Settings → Beep Sound Settings (Image Send) →
Internet Fax
Configure settings for sounds generated when an Internet fax is
received and when a communication error occurs.
Sound Settings → Beep Sound Settings (Common) →
Keys Touch Sound
Configure settings for the sound generated when a key is tapped, and
whether a sound is generated when the key for a default setting is tapped.
12:00
Job Status
Paper Empty
Cancel
10:15
System Info.
Home
Job Status
Easy
Fax
Sharp OSA
Easy
Scan
Easy
Copy
Toner
Quantity
Operation
Guide
Enlarge
Display
Mode
Settings
Total
Count
Brightness
Adjustment
Job Status
Settings
Status
Home Screen
Settings
Copy Settings Printer
Settings
System Settings
Sitemap
Logout
System Settings
User Control
Image Send
Settings
Document Filing
Settings
Sharp OSA
Settings
Common
Settings
Authentication
Settings
Network
Settings
Energy Save
Security
Settings
Init. Install.
Settings
System Control Image Quality
Adjustment
Top of Page