14
BEFORE USING THE MACHINE
LOADING PAPER IN THE TRAY 3/4
2
Fan the paper.
Fan the paper well before loading it. If the paper is not
fanned, multiple sheets may feed at once and cause a
misfeed.
3
Lift the feed roller, and place paper
into the tray.
Load the paper with the print side facing up. The stack must
not be higher than the indicator line (maximum of 1250
sheets for tray 1, or maximum of 850 sheets for tray 2).
Do not load the paper as shown below.
4
Lower the feed roller, and gently push
the paper tray into the machine.
Push the tray firmly all the way into the machine slowly.
Forcefully inserting the paper may cause skewed feeding
and paper misfeeds.
1
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3.
To load a different size of paper, go to the next step.
Keep holding the handle until the lock is released.
To Next Page
Loading...
Need help?
General
