I
DISASSEMBLY
Removing the CD mechanism
(81)X2
w
@xlZmm
Black
Caution on Disassembly
Follow the below-mentioned notes when disassembling ths
unit and reassemblmg it, to keep its safety and excellent per-
formance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated cir-
cuits and other circuits when servicing.
--
3
L
4
REMOVAL
Front panel
‘1
PROCEDURE
FIGURE
I.
Open the battery lid. 13-l
(Al)xl
2. Screw
(A2)x9
3. Open the cassette lid.
(A3)xZ
4. Socket (A4)xi
15-l
CD block
1.
screw
@1)x5
13-2,14-i
2. Socket (62)x2
14-Z
I. CD sew0
PWB
1.
Screw
(Ci)x4
14-2
2. Socket (C2)xl
3. Flexible PWB (C3)xl
2. CD mechanism 1. Screw..
@1)x3
14.2
Frame (with PWB) 1. Screw (El)x3
13-2,14-l
2. Socket lEZlx5
14.3,5
Tape mechanism
1. Screw
fF11x3
14-5
2. Socket iF2ix4
14-4
5
LCD
PWB
1. Screw (Gl)x6
14.1
2. Socket
(GZ)x2
3 Connector (G3)xl
6
CD switch
PWB
1. Knob..
ftillxl
14-s
Following the disassembling procedure, steps 1 and 2, remove
the CD mechanism.
Removing the frame (with main/CD switch/function
selection/volume/relay PWB)
Following the disassembling procedure, steps
1,
2, 3, remove
the frame.
Removing the tape mechanism
Following the disassembling procedure, steps 1 and 4, remove
the tape mechanism. However this procedure makes it difficult
wire treatment when assembling. Thera‘fore disassemble, fol-
lowing the steps
1,
2, 3, 4, (As for removal of main parts refer
to P.16
-
17)
Figure
14-l
CD mechanism
CD ~erw
PWB
(ClIX4
(A2)XZ
#3XlOnm
Figure 14-2
Figure
13-1
(E2)Xl
Figure 14-3
(F2)xl
Figure 14-4
(H2Ix4
CBXlOmm
Figure 13-2
-13-
Figure 14-5
(Jl)X6
ia3XlOmm
To Next Page
Loading...