Sharp CD-PC651H

PREPARATION FOR USE ;
7
AM loop ‘
| aerial
Z ey
ANTENNA
Fra
75 OHMS
o0d0
0900400 80yog
tnoncengoed FOQ)
External FM aerial
{| UaNGT PONE HLS
HUMAATTOOITT ACI
@ Unpiug the AC power lead from the AC socket before con-
necting or disconnecting any component.
i Aerial connection
Supplied FM aerial
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial
Connect the AM loop aerial wire to the AM LOOP socket. Position
the AM loop aerial for optimum reception.
Place the AM loop aerial on a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
Notes:
@ Do not place the aerial on the main unit as it may resuit in
noise pickup from the internal digital electronics.
Place the aerial away from the unit for better reception.
@ If the AM loop aerial and the FM aerial wire are placed near
the AC power lead, interference may result.
External FM aerial
Use an external FM aerial if you require better reception.
Consult your deater.