Sharp CD-PC651H

COMPACT DISC OPERATION
Caution:
Do not carry the unit with discs left in the ~
will automatically play.
12 cm (5*)
disc trays. The discs may come loose inside
the unit and they may be damaged or cause
damage to the unit. This may also cause mal-
functions. .
Do not place two CDs in one disc position.
Do not push the disc tray whilst it is moving. .
Do noi attempt to turn the disc tray by hand. This
may cause malfunctions.
If the power fails whiist the tray is open, wait until
the power is restored.
If the disc tray is stopped forcibly, “ERR” will ap-
‘pear in the display and the unit will not function.
If this occurs, press the ON/STAND-BY button to
enter the stand-by mode and then turn the power
on again.
If TV or radio interference occurs during CD oper-
ation, move the unit away from the TV or radio. -
If a disc is damaged, dirty, or loaded upside
down, the disc will be skipped and ‘the next disc
MCD playback:
1
Press
the
ON/STAND-BY
button
to
turn
the
power.
on.
2
Press
the
CD
button.
|
3
Press
the
OPEN/CLOSE
button
to
open
the
disc
tray.
4
Place
the
CD(s)
on
the
disc.tray,
label
side
up.
-
@®
CDs
can
be
placed
on
any
open
position
on
the
disc:
tray.’
@
Be
sure
to
place
8
cm
(3")
CD(s)
in
the
middle
of
the
disc
trays.
.
.
Caution:
a
Do
not
stack
CDs
in
the
tray.
:
e
4
This
can
damage
the
player
and
the
CDs.
5
When
loading
a
third disc,
press
the
DISC
SKIP
button
to
turn
the
disc
tray,
then
place
the
CD
in
the
open
position.
—
6
Press
the
OPEN/CLOSE
button
to
‘close
the
disc
tray.
@
The
total
number
of
tracks
and
the
total
playing
time
for
one
disc
will
be
displayed.
At
this
time,
the
disc
number
indicator
is
flashing.
7
Prass
the
desired
disc
number
button
(G1
-
©
3).
8 Press the ®/< (hc) bution.
@
Playback
will
begin
from
track
1
on
the
disc
you
have
selected
to
play.
,
@
After
the
disc
finishes
playing,
ihe
next
disc
will
automatically
play.
@
When
there
is
no
CD
in
one
of
the
disc
1
-
3
positions,
that
position
will
be
skipped
and
the
next
CD
will
be
played.
@
When
the
last
track
on
the
third
disc
has
finished
playing,
the
unit
will
stop
automatically.
To interrupt playback:
®
Press
the
CD
If
button
on
the
remote
control.
@ "IF will appear.
@Press
the
Pc
button
to
resume
playback
from
the
same
point.
To stop playback:
Press the @ (CD M) button:
To remove the CDs:
Whilst
in
the
stop
mode,
press
the
OPEN/CLOSE
button.
@
The
disc
tray
will
open.
Remove
the
two
discs.
Then,
press
‘the
DISC
SKIP
bution
to
rotate
the
disc
tray
and
remove
the
remaining
disc.
After
use:
. .
Press
the
ON/STAND-BY
button
to
enter
the
stand-by
mode.
E-13