EasyManuals Logo
Home>Sharp>All in One Printer>CR4 Cloud Series

Sharp CR4 Cloud Series User Manual

Sharp CR4 Cloud Series
944 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
1-10
BEFORE USING THE MACHINEâ–ºBEFORE USING THE MACHINE
TURNING ON THE POWER
This section describes how to turn on/off the machine's power and how to restart the machine.
Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the
[Power] button on the operation panel.
Turning on the power
• Turn the main power switch to the " " position.
• When the main power indicator lights in green, press the [Power] button.
Turning off the power
Turn off the power by pressing the [Power] button, then turn the main power switch to the " " position.
Restart the machine
Turn off the power by pressing the [Power] button and then press it again to turn on the power.
When a finisher (large stacker) or saddle stitch finisher (large stacker) is installed on the MX-5050N/MX-5070N/MX-6050N/
MX-6070N, open the front cover on the finisher (large stacker), or the front upper cover on the saddle stitch finisher (large
stacker), before opening the front cover of the machine.
• When turning off the main power switch, press the [Power] button on the operation panel and then turn the main power
switch to the " " position.
In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order.
If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off,
abnormal noises, degraded image quality or other problems may result.
• Turn off both the [Power] button and the main power switch and unplug the power cord if you suspect a machine failure, if
there is a bad thunderstorm nearby, or when you are moving the machine.
• When using the fax or Internet fax function, always keep the main power switch in the " " position.
• In order for some settings to take effect, the machine must be restarted. In some states of the machine, restarting with the
[Power] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again.
Main power indicator [Power] button
The main power switch

Table of Contents

Other manuals for Sharp CR4 Cloud Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp CR4 Cloud Series and is the answer not in the manual?

Sharp CR4 Cloud Series Specifications

General IconGeneral
BrandSharp
ModelCR4 Cloud Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals