Sharp DV-3750S - Page 12

TWANLEA pil | 2)
Oo@ VY
4
60
OC
008
DOO \
6)- © Skipping Channels
The Channel selector button (/\) buiton and (V )
button on the set and remote control normally cycle
through all the channels, 1 through 39. If you wish,
you can set the TV so that only selected channels
are tuned in while other, perhaps empty channels,
are skipped.
‘ls
Select a channel number you wish to skip with
the Channel! selector (/\) or ( V ) button on the
TV set or remote control.
_ Press the Preset buiton of the Remote Control.
Until MANUAL or FINE.
. Press the Skip button. The displayed channel
number will turn from green to red.
. Press the Preset button until return to normal
mode. A large red channel number will be
displayed on the screen.
. Repeat steps 1 through 4 if you wish to skip
other channels.
Notes:
1) If you select the channels to be skipped with
the Channel select butions on the remote
control, the channel number will be
displayed in red.
2) It is not possible to set Channel Skip during
Full Aulo Search Tuning.
© -@ Resetting Skipped Channels
si
Press the --- button to select single/double digit
entry.
. Select a skipped channel number, displayed in
red, with the 0-9 digit buttons.
. Press the Preset button of the Remote control
until MANUAL or FINE.
. Press the Skip button of the Remote Control.
The displayed channel number will turn green,
and the channel! will no longer be skipped.