20 www.sharp.co.uk/support
Connecting a TV with LINE 1 (TV) Output and LINE 2 Input SCARTS
Use the SCART leads (one SCART lead: supplied) to connect the Unit to your TV and VCR or
DECORDER.
LINE 2
LINE 1 (TV)
S-VIDEO
OUTPUT
SELECTOR
RGB
VIDEO
S-VIDEO
AUDIO
VCR/DVD OUT
R
L
AUDIO
VIDEO
ANTENNA
IN
OUT
DVD OUT
R
L
AUDIO
DIGITAL
TV
This Unit
To LINE 2
SCART
To LINE 1 (TV)
SCART
To SCART
input
VCR/DVD OUT jacks can be used instead of
LINE 1(TV), depending on your TV.
Change the position according to
the signal type (VIDEO/S-VIDEO/
RGB) that is output to TV during
DVD playback.
To SCART
output
VCR or DECORDER
SCART OUTPUT
The factory default setting for the OUTPUT SELECTOR is “VIDEO”. If your TV supports the higher quality
modes S-VIDEO or RGB via the SCART, then please set the selector for your preference.
Required leads
SCART lead (the other SCART
lead: commercially available)
SCART lead (one SCART lead:
supplied)
: Signal flow
Basic Connection
DVNC65H019_024.pm6 30/8/02, 11:14 am20
To Next Page
Loading...
