VCR/DVD RECORDER
COMBINATION
47
Disc Playback
Playback
Basic playback
Note
•For DVD-RW (Video mode),
DVD-R (Video mode), and
DVD+R discs which are
already finalized and
DVD+RW discs, a Title Menu
will be displayed instead of
thumbnails.
Screen for the Disc finalized
on this unit:
•You can resume playback
from the point you stopped
playback (Resume playback).
Refer to page 51 for details
about resume playback.
• Some discs may start playback
automatically.
Title Menu
1 CH 10 XP
2 CH 10 XP
3 CH 8 LP
4 CH 8 LP
5 CH 8 EP
1
Press POWER on the remote
control or the front panel of
the unit.
When you are playing back a
DVD, turn on the TV and be sure
to select the input to which the
unit is connected.
2
Press OPEN/CLOSE EJECT A
to open the disc tray.
The disc tray will open.
3
Place the disc on the disc tray
with its label facing up and
make sure to align the disc to
the disc tray guide.
4
Press OPEN/CLOSE EJECT A
to close the disc tray.
5
Press TOP MENU to display
the title menu.
You can change “Original” or
“Playlist” of VR mode using
MENU/LIST.
Screen for DVD-RW/-R in
Video mode:
Screen for DVD-RW in VR
mode:
MENU/LIST button
6
Select a desired title using
Cursor K / L / { / B, then
press ENTER.
Playback will start.
7
Press STOP C to stop play-
back.
To e j ect the disc, press
OPEN/CLOSE EJECT A to
open the disc tray, then remove
the disc before turning off the unit.
Playlist
JAN/1 1:00AM CH12 XP
4 5 6
1 2 3
Original
JAN/1 1:00AM CH12 XP
4 5 6
1 2 3
Title List
JAN/1 1:00AM CH12 XP
4 5 6
1 2 3
disc
tray
guide
press first.
DVD
1 2
4
7
5
7
6
Recording
Disc Playback EditingBefore you start Connections Getting started
Changing the Setting menu
VCR functions Others
Español
The unit may take a while to
recognize the disc type.
E9656UD_EN_1.qx4 05.7.15 11:56 AM Page 47
To Next Page
Loading...
