TAKING CARE OF THE PRODUCT
When the dust-disposal warning lamp(Red) and sound indicate
Dust cup (Removing each component)
1
2
Clean of the dust cup set also in the following cases
The filter is blocked up and the suction power has been reduced.
Stop operation and disconnect the power plug.
Empty the dust cup, clean of the cylindrical
filter and the high efficiency air filter.
If you continue to use the product without cleaning, it will come
to a stop automatically.
• Wait at least 2 minutes before restarting your cleaning operation.
(If you restart the cleaning operation within 2 minutes, the warning sound may beep.)
• The suction power gets reduced.
• Operation noises are changed or increased.
• The unit's body gets hot.
• Foreign objects are tangled in the cylindrical filter.
• You are worryed about the dirtiness of the dust cup.
• The bottom lid of the dust cup is hard to open.
• The product has suctioned fine powder.
Removing the filter cover.
Turn the cup cover in the
direction of arrow,
Remove t he cup
cover.
Shift the lock in the
direction of release.
Removing the high efficiency air filter.
• Do not try to grasp the
grid element to remove
the filter. (There is a risk
of injuries.)
Removing the cup cover.
Remove it.
To Next Page
Loading...
