11 | P a g e
If printing is blurry even when the ink roller is in the proper position, replace
the roller.
Ink roller: IR40T
WARNING:
APPLYING INK TO WORN INK ROLLER OR USE OF UNAPPROVED
INK ROLLER MAY CAUSE SERIOUS DAMAGE TO PRINTER.
1. Set the power switch to off.
2. Remove the printer cover (Fig. 1)
3. Hold the top of the ink roller and remove the roller by pulling it toward
you and then upward. (Fig. 2)
4. Install the new ink roller in the correct position. Make sure that the
roller is securely in place. (Fig. 3)
5. Put back the printer cover.
To Next Page
Loading...
