Sharp EL-2192RII - CALCULATION EXAMPLES GUIDE; Example Setup and Error Handling; MIXED CALCULATION EXAMPLE; Mixed Calculation Demonstration

15 | P a g e
1. Set the decimal selector as specified in each example. The rounding
selector should be in the ‘‘5/4’’ position unless otherwise specified.
2. The constant/add mode selector and grand total set mode selector
should be in the “•” position (off) unless otherwise specified.
3. The print/item count mode selector should be in the “ ”
position unless otherwise specified.
4. If an error is made while entering a number, press or and enter
the correct number.
5. Negative values are printed with ‘‘–’’ symbol in red.
MIXED CALCULATION EXAMPLES