Sharp EL-2192RII - OPERATING CONTROLS AND SELECTORS; Power, Print, and Item Count Mode Selector; Decimal Place Selector

5 | P a g e
OFF:
POWER OFF
:
POWER ON; SET TO THE NON PRINT MODE
P:
POWER ON; SET TO PRINT MODE
P IC:
POWER ON; SET TO PRINT AND ITEM COUNT MODE.
For addition or subtraction, each time is pressed, 1 is added to the item counter,
and each time is pressed, 1 is subtracted.
 The count is printed when the calculated result is obtained.
 Pressing , , , or clears the counter.
Note:
The counter has a maximum capacity of 3 digits (up to +999). If the count exceeds the
maximum, the counter will recount from zero.
Presets the number of decimal places in the answer. In the ‘‘F’’ position,
the answer is displayed in the floating decimal system.