Sharp EL-556G - Arithmetic Operations; Constant Calculations; Functions

Note: For the examples given in subsequent ex-
planations, make sure that none of the fol-
lowing symbols or guidance are displayed
unless otherwise specified.
A, FIX, SCI, ENG: Pages 6, 7
BIN, OCT, HEX: Page 12
SCIENTIFIC CALCULATIONS
e If the FIX, SCI, or ENG indicator is displayed,
clear the indicator by pressing (FSE]. (See
page 8)
Arithmetic Operations (— page 199)
Constant Calculations (— page 200)
Arithmetic operations using constants can be per-
formed by following the procedure below:
4) Enter the constant value.
(2) Specify the operator (+, -, x, +).
@) Specify the constants position by pressing
(+) . (The constant’s position can be changed
by pressing (—) again.)
(4) Enter the input value and press (“= .
e The “x” and “?” symbols in the display indicate
the constant value and the input value, respec-
tively.
e Functions such as y* and nCr which require two
numeric values cannot be used for the input
value.
e To quit constant calculations, press (Nc) .
Functions (— page 201) 7
Before performing function calculations be sure to
press [N/c) .
e Before starting calculations, specify the angular
unit. (See page 8)