Sharp EL-6790

— When vou performed the
operation, “5. Deleting the
Data' on page 30.
DO VOU WANT TO
(Yes/No)
(it is recommended to press to free up memory.)
The indication "WORKING..." shown on the side of the
receiving Organizer at the beginning or end of the data
transfer means that the memory has begun to be freed up
automatically.
The indication "Replace the OPERATING batteries !” shown
at the time of freeing up memory means that the operating
batteries are almost exhausted. Replace them with new
ones then try again to free up memory.
The backlight function does not work while the memory is
being freed up.
32
Using the Option Function
You can share the specific data, the data in the specific mode,
or the whole data (for the purpose of making a backup copy or
restoring the data) by transferring it to/from another EL-6750/
6790.
Backup data transfer is only possible between identical
models.
Communicating with another EL-6750/6790 requires the
communication cable. As this cable may not be available in
some countries, please check with your local SHARP dealer.
. Cautions and Special Notes for Data Transfer
Turn off the secret function before transferring data by
mode. If the secret function is turned on, data cannot be
transferred by mode.
After data transfer, the data on the transfering Organizer is
preserved.
Alarm and Reminder settings are ignored. The alarm will
not sound during data transfer.
The Auto power off function is disabled in all the transfer
modes.