16
Advanced Keyboard/PROGRAMMING USING THE SHARP EL-9900
Copyright © 2002, Sharp Electronics Corporation. Permission is granted to photocopy for educational use only.
D+H⇒D ALPHA D + ALPHA H STO ALPHA
D ENTER
F×H⇒H ALPHA F × ALPHA H STO ALPHA
H ENTER
Line(X+1,0,X+2, 2ndF DRAW A 2 X/θ/T/n + 1 ,
H) 0 , X/θ/T/n + 2 , ALPHA H
)
ENTER
D+H⇒D ALPHA D + ALPHA H STO ALPHA
D ENTER
X+2⇒XX/θ/T/n + 2 STO X/θ/T/n ENTER
If X<2N PRGM B 0 3 X/θ/T/n MATH F
Goto A 5 2 ALPHA N PRGM B 0 2
ALPHA A ENTER
ClrT PRGM C 1 ENTER
Print “DIST PRGM A 1 PRGM A 2
TRAVELED IS 2ndF A-LOCK D I S T SPACE T
R A V E L E D SPACE I S ENTER
Print D PRGM A 1 ALPHA D ENTER
End PRGM A 6 ENTER
Press 2ndF QUIT to exit the editor.
4. Press Y= and CL to clear the Y1 prompt. Press and CL to
clear additional prompts. Execute the BOUNCE program by pressing
PRGM A (EXEC) and select BOUNCE. The program will prompt you for
the height from which to drop the ball. Enter 8 feet by pressing 8
ENTER . Next, the program will prompt you for your bounce factor.
Enter the percentage 80% as the decimal equivalent of .8 by pressing .
8 ENTER . Finally, the program will prompt you for the number of
bounces. Enter 5 bounces by pressing 5 ENTER . The program draws
the ball bouncing and then displays the total distance traveled. Press
GRAPH to return to the bouncing-ball graph. A blinking cursor in the
upper right-hand corner tells you the program is still working.
CONVERGENCE OF A SERIES (continued)
▼
To Next Page
Loading...
