Sharp Elite PRO-60X5FD - Connecting to External Equipment; Connecting a PC

18
Connecting to External Equipment
Connecting a PC
Refer to page 67 for a list of PC signals compatible with the TV.
■
When using HDMI cable (HDMI 1, 2, 3, 4 or 5):
HDMI OUT
HDMI-certified cable
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable
to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog". (See page 67.)
•
The HDMI terminals only support digital signal.
■
When using DVI-HDMI conversion cable (HDMI 1):
DVI OUT
AUDIO
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect
a Ø 3.5 mm stereo minijack cable to the AUDIO IN
terminal and set "Audio Select" to "HDMI+Analog". (See page 67.)
■
When using analog RGB cable (PC IN):
RGBAUDIO
Ø 3.5 mm stereo minijack cable
Analog RGB cable
(D-sub 15-pin cable or VGA cable)
• When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
• When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 67.)
PRO-7060X5FDE.indb18PRO-7060X5FDE.indb18 2011/07/0116:38:192011/07/0116:38:19