EasyManua.ls Logo

Sharp ES-NIB814BWB-DE - Specific Safety Risks and Precautions; Electrical Safety and Shock Prevention; Burn and Flooding Risk Management

Sharp ES-NIB814BWB-DE
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Read these warnings. Follow the advice given
to protect yourself and others from risks and
fatal injuries.
RISK OF BURNS
Do not touch the drain hose or any discharged
water while your Washing Machine is running. The
high temperatures involved pose a burn risk.
RISK OF DEATH FROM ELECTRICAL
CURRENT
Do not connect your Washing Machine to the
mains electricity supply using an extension lead.
Do not insert a damaged plug into a socket.
Never remove the plug from the socket by pulling
the cord. Always hold the plug.
Never touch the power cord/plug with wet
hands as this could cause a short circuit or
electric shock.
Do not touch your Washing Machine if your
hands or feet are wet.
A damaged power cord/plug can cause fire or
give you an electric shock. When damaged it
must be replaced, this should only be done by
qualified personnel.
Risk of flooding
Check the speed of water flow before placing the
drain hose in a sink.
Take necessary measures to prevent the hose
from slipping.
Water flow may dislodge the hose if it is not
properly secured. Make sure the plug in your sink
does not block the plug hole.
EN - 5

Related product manuals