Why won't my Sharp ES-NFA014DWB-DE start?
If your Sharp Washer doesn't start, several factors could be at play. Ensure the machine is properly plugged in and that the fuses are in good working order; replace them if necessary. Verify that there is a stable mains power supply. Don't forget to press the Start/Pause button and confirm that the program dial is set to your desired position. Finally, make sure the machine door is fully closed.
What to do if my Sharp ES-NFA014DWB-DE Washer does not discharge water?
If your Sharp Washer isn't draining water, the drain hose might be clogged or twisted; inspect it, and either clean or untwist it. Another potential issue is a clogged pump filter, which should be cleaned. Also, if the laundry is too tightly packed in the drum, redistribute it evenly.
How to stop my Sharp Washer from vibrating?
If your Sharp Washer vibrates excessively, it might be due to several reasons. Check if the feet of the machine have been properly adjusted. Ensure that the transit bolts, used for transportation, have been removed. Avoid placing the machine on a hard surface. If you've overloaded the machine or the laundry is unevenly spread, redistribute the load evenly. Note that a small load can also cause vibration, but this will not prevent the operation of your machine.
Why is my Sharp ES-NFA014DWB-DE Washer not taking in water?
If your Sharp Washer isn't taking in water, start by checking if the water tap is turned on. Inspect the water inlet hose for any twists and untwist if necessary. Also, the water inlet hose or inlet filter may be clogged, so clean these filters. Lastly, ensure that the machine door is completely closed.
How to reduce foam in my Sharp Washer detergent drawer?
If you notice excessive foam in the detergent drawer of your Sharp Washer, it's likely due to using too much detergent or using the wrong type. To stop the foam, press the Start/Pause button, then dilute one tablespoon of softener into 1/2 litre of water and pour into the detergent drawer. Press the Start/Pause button again after 5-10 minutes. Ensure you only use detergents specifically produced for automatic Washing Machines.
Why is the spin cycle delayed on my Sharp ES-NFA014DWB-DE?
If the spin cycle on your Sharp Washer is delayed or doesn't occur, it might be because the Unbalanced load control system has been activated. This is not a fault. The system is attempting to redistribute your laundry. Once the load is balanced, the spin cycle will commence. For future washes, load the drum evenly.
Why is my Sharp ES-NFA014DWB-DE Washer not cleaning clothes properly?
If you're not satisfied with the washing results from your Sharp Washer, consider whether your laundry is too dirty for the selected program. Refer to the program tables to choose a more suitable program. Also, ensure you're using enough detergent as instructed on the packaging, and that you're not overloading the machine beyond the maximum capacity for the selected program.
What to do if my Sharp ES-NFA014DWB-DE is not cleaning well in hard water?
If you're experiencing unsatisfactory washing results with your Sharp Washer, especially in areas with hard water, try increasing the amount of detergent according to the manufacturer’s instructions. Also, make sure your laundry is spread out in the drum.
Why does my Sharp Washer discharge water immediately after loading?
If your Sharp Washer immediately discharges water as soon as it's loaded, the end of the water drain hose might be positioned too low. Check that the drain hose is at a suitable height.
General| Loading type | Front loading |
|---|---|
| Capacity | 10 kg |
| Energy Efficiency Class | A+++ |
| Spin Speed | 1400 RPM |
| Noise Level (Spinning) | 76 dB |
| Color | White |
| Water Consumption | 52 L |
General safety precautions for operating the washing machine.
Guidelines for safe and proper operation of the washing machine.
Information on handling packaging materials and environmental considerations.
Tips for efficient use of the washing machine to save energy and water.
Detailed specifications of the washing machine, including electrical, capacity, and dimensions.
Step-by-step guide to removing transit bolts for safe operation.
Instructions on how to level the washing machine using adjustable feet.
Guidance on connecting the washing machine to the power supply.
Instructions for connecting the water supply hoses to the machine.
How to properly connect the drain hose for water disposal.
Description and components of the detergent drawer.
Explanation of the different compartments within the detergent drawer.
How to use the program selection dial.
Explanation of the washing machine's electronic display and indicators.
Steps for sorting and preparing laundry before washing.
How to load laundry correctly into the drum.
Guidance on the type and amount of detergent to use.
Basic steps to start and operate the washing machine.
How to choose the most suitable washing program.
Explanation of the automatic half-load function and its benefits.
Details on extra functions like temperature and spin speed adjustment.
How to activate and deactivate the child lock feature.
Steps to cancel a running washing program.
What happens when a program finishes and post-wash actions.
Key information regarding detergent use, cleaning, and door operation.
Important safety warnings before cleaning and maintenance.
How to clean the water inlet filters.
Instructions for cleaning the pump filter to maintain performance.
How to remove and clean the detergent drawer.
How to clean the external casing of the washing machine.
Instructions for cleaning the washing machine drum, especially rust stains.
Guide to identify and resolve common machine faults and issues.
Explains fault codes and recommended actions for system errors.
To Next Page