Sharp ES-NFH014CWNA-EN

Questions and Answers

D
Dr. Christopher Lewis DVMAug 16, 2025
Why won't my Sharp ES-NFH014CWNA-EN Washer start?
- B
  Brian SuarezAug 17, 2025
  If your Sharp Washer doesn't start, several factors could be at play. Ensure the machine is properly plugged in and that the fuses are in good working order; replace them if necessary. Verify that there is a stable mains power supply. Don't forget to press the Start/Pause button and confirm that the program dial is set to your desired position. Finally, make sure the machine door is fully closed.
D
David PerryAug 19, 2025
What to do if my Sharp Washer does not discharge water?
- A
  Amber KellerSep 12, 2025
  If your Sharp Washer isn't draining water, the drain hose might be clogged or twisted; inspect it, and either clean or untwist it. Another potential issue is a clogged pump filter, which should be cleaned. Also, if the laundry is too tightly packed in the drum, redistribute it evenly.
D
David GibsonAug 22, 2025
Why is the spin cycle delayed on my Sharp Washer?
- V
  vevansAug 22, 2025
  If the spin cycle on your Sharp Washer is delayed or doesn't occur, it might be because the Unbalanced load control system has been activated. This is not a fault. The system is attempting to redistribute your laundry. Once the load is balanced, the spin cycle will commence. For future washes, load the drum evenly.
D
Donald NelsonAug 25, 2025
What to do if my Sharp ES-NFH014CWNA-EN Washer is not cleaning well in hard water?
- T
  Thomas DeanAug 26, 2025
  If you're experiencing unsatisfactory washing results with your Sharp Washer, especially in areas with hard water, try increasing the amount of detergent according to the manufacturer’s instructions. Also, make sure your laundry is spread out in the drum.
S
Sarah BoydAug 27, 2025
How to remove detergent residue from laundry after using my Sharp ES-NFH014CWNA-EN?
- S
  Sharon GrahamAug 27, 2025
  If your laundry has detergent residue after washing in your Sharp Washer, it may be due to non-dissolving particles in some detergents appearing as white spots. You can perform an extra rinse or clean your laundry with a brush after it dries.
D
deborahbarryAug 30, 2025
How to stop my Sharp ES-NFH014CWNA-EN Washer from vibrating?
- S
  Shannon DavilaAug 30, 2025
  If your Sharp Washer vibrates excessively, it might be due to several reasons. Check if the feet of the machine have been properly adjusted. Ensure that the transit bolts, used for transportation, have been removed. Avoid placing the machine on a hard surface. If you've overloaded the machine or the laundry is unevenly spread, redistribute the load evenly. Note that a small load can also cause vibration, but this will not prevent the operation of your machine.
R
Richard ShawSep 2, 2025
Why is my Sharp Washer not taking in water?
- D
  Derek McculloughSep 2, 2025
  If your Sharp Washer isn't taking in water, start by checking if the water tap is turned on. Inspect the water inlet hose for any twists and untwist if necessary. Also, the water inlet hose or inlet filter may be clogged, so clean these filters. Lastly, ensure that the machine door is completely closed.
D
darrenlaneSep 5, 2025
How to reduce foam in my Sharp ES-NFH014CWNA-EN Washer detergent drawer?
- A
  ayalaryanSep 5, 2025
  If you notice excessive foam in the detergent drawer of your Sharp Washer, it's likely due to using too much detergent or using the wrong type. To stop the foam, press the Start/Pause button, then dilute one tablespoon of softener into 1/2 litre of water and pour into the detergent drawer. Press the Start/Pause button again after 5-10 minutes. Ensure you only use detergents specifically produced for automatic Washing Machines.
L
Linda CollierSep 7, 2025
Why is my Sharp ES-NFH014CWNA-EN Washer not cleaning clothes properly?
- L
  likatrinaSep 7, 2025
  If you're not satisfied with the washing results from your Sharp Washer, consider whether your laundry is too dirty for the selected program. Refer to the program tables to choose a more suitable program. Also, ensure you're using enough detergent as instructed on the packaging, and that you're not overloading the machine beyond the maximum capacity for the selected program.
J
James BassSep 10, 2025
Why does my Sharp ES-NFH014CWNA-EN discharge water immediately after loading?
- K
  kentsmithSep 10, 2025
  If your Sharp Washer immediately discharges water as soon as it's loaded, the end of the water drain hose might be positioned too low. Check that the drain hose is at a suitable height.

Summary

SAFETY INSTRUCTIONS

General Safety Warnings

General safety advice for operating the washing machine.

During Use

Guidelines and precautions for using the washing machine.

Packaging and Environment

Information on packaging materials and environmental considerations.

Savings Information

Tips for efficient use and energy/water savings.

Door Emergency Opening Function

Instructions on how to open the door in case of an emergency.

Child Safety

Safety guidelines related to children and the washing machine.

TECHNICAL SPECIFICATIONS

Technical Specifications

Comprehensive list of technical specifications for the washing machine.

INSTALLATION

Removing the Transit Bolts

Step-by-step guide to remove transit bolts before operation.

Adjusting the Feet

How to adjust the machine's feet for stability and leveling.

Electrical Connection

Instructions for connecting the washing machine to the power supply.

Water Inlet Hose Connection

Detailed steps for connecting the water inlet hose.

Water Discharge Connection

Instructions on how to connect the water drain hose.

CONTROL PANEL OVERVIEW

Detergent Drawer

Information about the detergent drawer and its compartments.

Sections

Detailed explanation of the different sections of the control panel.

Program Dial

How to use the program selection dial.

Electronic Display

Explanation of the electronic display and its indicators.

USING YOUR WASHING MACHINE

Preparing Your Laundry

Instructions on how to prepare laundry before washing.

Putting Laundry in the Machine

Guidance on loading laundry into the washing machine drum.

Adding Detergent to the Machine

How to correctly add detergent and softener to the machine.

Operating Your Machine

Steps to start and operate the washing machine.

Selecting a Programme

How to choose the appropriate washing program.

Half-Load Detection System

Explanation of the automatic half-load detection feature.

Temperature Selection

How to adjust the washing water temperature.

Spin Speed Selection

How to select the spin speed and cancel spinning.

Delay Timer

How to use the delay start function for the washing cycle.

Steam Assist

Explanation of the Steam Assist function.

Anti-Allergic

Details on the Anti-Allergic wash function.

Easy Ironing

Information about the Easy Ironing function to reduce wrinkles.

Pre-Wash

How to use the pre-wash function for heavily soiled laundry.

Extra Rinse

Explanation of the Extra Rinse option.

Rapid Wash

Information on the Rapid Wash function for faster washing.

No Spin

How to disable the spin cycle.

Cold Wash

Details on using the Cold Wash function.

Child Lock

How to activate and deactivate the child lock feature.

Cancelling the Programme

Instructions on how to cancel a running washing program.

Programme End

What happens when a washing program finishes.

PROGRAMME TABLE

Important Informations

Important notes and recommendations regarding program usage.

CLEANING AND MAINTENANCE

Warning

Critical warnings before performing maintenance or cleaning.

Water Inlet Filters

Instructions for cleaning the water inlet filters.

Pump Filter

How to clean the pump filter to ensure proper drainage.

Detergent Drawer

Steps for removing and cleaning the detergent drawer.

Body; Drum

Advice on cleaning the exterior body and the drum of the machine.

TROUBLESHOOTING

Automatic Fault Warnings and What to Do

Explains automatic fault codes and their corresponding troubleshooting steps.