Why are there grey spots on my laundry after washing in my Sharp ES-NFB814BSNA-EN Washer?
If grey spots appear on your laundry after washing in your Sharp Washer, it's likely due to untreated oil, cream, or ointment on the items. In the next wash, use the amount of detergent as instructed on the packaging.
How to fix Sharp ES-NFB814BSNA-EN that does not discharge water?
If your Sharp Washer isn't discharging water, check the drain hose for clogs or twists; clean or untwist it as needed. Also, the pump filter might be clogged, so clean the pump filter. Ensure that the laundry is spread evenly in the machine.
Why won't my Sharp ES-NFB814BSNA-EN Washer start?
If your Sharp Washer doesn't start, several factors could be at play. Ensure the machine is properly plugged in and that the fuses are in good working order; replace them if necessary. Verify that there is a stable mains power supply. Don't forget to press the Start/Pause button and confirm that the program dial is set to your desired position. Finally, make sure the machine door is fully closed.
What to do if my Sharp Washer does not discharge water?
If your Sharp Washer isn't draining water, the drain hose might be clogged or twisted; inspect it, and either clean or untwist it. Another potential issue is a clogged pump filter, which should be cleaned. Also, if the laundry is too tightly packed in the drum, redistribute it evenly.
What to do if Sharp ES-NFB814BSNA-EN Washer does not intake water?
If your Sharp Washer isn't taking in water, start by checking if the water tap is turned on. Inspect the water inlet hose for any twists and untwist it if necessary. Also, the water inlet hose or inlet filter may be clogged, so clean the water inlet hose filters and the inlet filters. Lastly, ensure that the machine door is completely closed.
Why does my Sharp Washer discharge water immediately after loading?
If your Sharp Washer immediately discharges water as soon as it's loaded, the end of the water drain hose might be positioned too low. Check that the drain hose is at a suitable height.
How to reduce foam in my Sharp ES-NFB814BSNA-EN Washer detergent drawer?
If you notice excessive foam in the detergent drawer of your Sharp Washer, it's likely due to using too much detergent or using the wrong type. To stop the foam, press the Start/Pause button, then dilute one tablespoon of softener into 1/2 litre of water and pour into the detergent drawer. Press the Start/Pause button again after 5-10 minutes. Ensure you only use detergents specifically produced for automatic Washing Machines.
What to do if my Sharp ES-NFB814BSNA-EN is not cleaning well in hard water?
If you're experiencing unsatisfactory washing results with your Sharp Washer, especially in areas with hard water, try increasing the amount of detergent according to the manufacturer’s instructions. Also, make sure your laundry is spread out in the drum.
Why is my Sharp ES-NFB814BSNA-EN not cleaning clothes properly?
If you're not satisfied with the washing results from your Sharp Washer, consider whether your laundry is too dirty for the selected program. Refer to the program tables to choose a more suitable program. Also, ensure you're using enough detergent as instructed on the packaging, and that you're not overloading the machine beyond the maximum capacity for the selected program.
Why is my Sharp ES-NFB814BSNA-EN Washer not taking in water?
If your Sharp Washer isn't taking in water, start by checking if the water tap is turned on. Inspect the water inlet hose for any twists and untwist if necessary. Also, the water inlet hose or inlet filter may be clogged, so clean these filters. Lastly, ensure that the machine door is completely closed.
General| Capacity | 8 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Energy Efficiency Class | B |
| Color | White |
| Water Consumption | 48 L/cycle |
To Next Page