Sharp HFC-134a

9
ENGLISH
Power Failure
While this feature is operating, it will indicate the rise of
inside temperature caused by power failure or something.
1
Press the select button and select the power failure
icon.
(The icon is orange.)
2
Press the button. [ : ON, : OFF ]
3
Press the button.
To cancel operation
It is the same method as starting operation.
Press the button in step 2.
Indication of power failure
• Atthetimeofrepower,iftheinsidetemperatureofthe
refrigeratorandfreezercompartmentbecomesasfollows
(R: more than 7
°C,
F: more than -10
°C
), power failure
icon will blink slowly.
• Checkthequalityoffoodbeforeyoueat.
How to cancel the indicator blink
Press the button while the icons are blinking.
Door Alarm
• Whentherefrigeratordoorisleftopen,thedooralarmwill
sound.
• Thedooralarmwillsoundin1minuteafteropeningthe
door and again after 1 minute (once in each case).
• Ifthedoorisleftopenforapprox.3minutes,thealarmwill
sound continuously.
• Atrst,dooralarmisset"ON".
To cancel operation
1
Press the select button and select the door alarm
 indicationlikethebelowgure.
2
Press the button. [ : ON, : OFF ]
3
Press the button.
To start operation
It is the same method as canceling operation.
Press the button in step 2.
Door alarm indication
It shows Door alarm "ON".
2 3
1
Flashing
Flashing
The indication will disappear.
Blink slowly
(B162)-book.indb 9 2010/12/08 16:53:07