Sharp HT-SB350(W)

E-11
HT-SB350(BK)
2010 August 16 HT-SB350_A6_EN_UK.fm
ENGLISH
HT-SB350(W)
Preparation for Use
Sound bar connections to TVs (continued)
 Connecting to a TV
If the TV/monitor has an audio output, connect it to the LINE IN
1 sockets on the rear of the unit.
To select LINE IN 1 function:
 On the unit: Press FUNCTION button repeatedly until “L1” is
displayed.
 On remote control: Press LINE button repeatedly until “L1” is
displayed.
 Connecting to a TV (with Headphone socket)
If the TV/monitor has headphone socket, connect it to the LINE
IN 2 socket on the rear of the unit.
To select LINE IN 2 function:
 On the unit: Press FUNCTION button repeatedly until “L2” is
displayed.
 On remote control: Press LINE button repeatedly until “L2” is
displayed.
Notes:
 If the TV volume is continuously in low level, the unit will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
 If the speaker volume is continuously in very high level, the
unit will mute and recover after 3 seconds.
RIGHT LEFT
LINE IN 1
LINE IN 2
To audio output sockets
RCA cable (supplied)
Sound bar
TV
To LINE IN 1
sockets
RIGHT LEFT
HEADPHONE
LINE IN 1LINE IN 2
To HEADPHONE socket
Audio cable (not supplied)
Sound bar
TV
To AUDIO LINE
IN 2 socket