Sharp HT-SB400 User Manual

DE (1)
FR (2)
ES (3)
SV (4)
IT (5)
NL (6)
PT (7)
FI (8)
EN (9)
AR (10)
E-18
HT-SB400
2009 October 20
HT-SB400_A6_EN.fm
ENGLISH
References
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
speaker. There may be some deviations from these values in
individual speaker.
 General
(*) This power consumption value is obtained when in the touch sensing off
mode (RED).
Power source DC IN 12V 4A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Power
consumption
Power on: 12 W
Power Stand-by: 0.6 W (*)
Output power Front Speaker:
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Centre Speaker:
RMS: 7 W (10% T.H.D.)
RMS: 6.5W (0.9% T.H.D.)
Subwoofer:
RMS: 15 W (10% T.H.D.)
RMS: 9.8 W (0.9% T.H.D.)
Speaker 3.1-way Speaker System
Front Speakers: 40 mm (1-9/16") Full Range (x 2)
Impedance: 12 ohms / Channel
Centre Speakers: 40 mm (1-9/16") Full Range (x 2)
Impedance: 6 ohms
(12 ohms x 2 parallel connections)
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Impedance: 3 ohms
(12 ohms x 4 parallel connections)
Audio output
terminals
Subwoofer Pre Out: 10 k ohms
Input terminals Analogue input (LINE 1): RCA type x 1pair (L/R)
500 mV/47 k ohms
Analogue input (LINE 2): Stereo mini jack Ø 3.5 mm
100 mV/47 k ohms
Dimensions Width: 985 mm (38-3/4")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight 2.15 kg (4.74 lbs.)

Sharp HT-SB400 Specifications

General

Brand	Sharp
Model	HT-SB400
Category	Speakers
Language	English