To Next PageTo Next Page
Need help?Do you have a question about the Sharp HT-SL50 and is the answer not in the manual?
General| Audio decoders | - |
|---|---|
| RMS rated power | 100 W |
| Audio output channels | 2.1 channels |
| Audio Return Channel (ARC) | Yes |
| Soundbar speaker RMS power | 25 W |
| Subwoofer type | Active subwoofer |
| Receiver included | No |
| Product color | Black |
| Apple docking compatibility | Not supported |
| Soundbar dimensions (WxDxH) | 801 x 50 x 26 mm |
| Subwoofer dimensions (WxDxH) | 115 x 307 x 422 mm |
Official statement of compliance from SHARP ELECTRONICS EUROPE GmbH.
Multilingual warnings on STAND-BY power, dangerous voltages, and user-serviceable parts.
Warnings about disconnecting power before access and protection from water/moisture.
Guidelines for discarding equipment in EU and non-EU countries.
Guidelines for businesses discarding equipment in EU and non-EU countries.
Welcome to the SHARP product and guide to operation.
Key notes on product features, HDMI, CEC, and audio signals.
Guides for connecting the sound bar to various TV types via HDMI or analog.
Guidelines for positioning, ventilation, environmental conditions, and electrical safety.
Identification and reference page for sound bar controls and indicators.
Identification and reference page for subwoofer controls and indicators.
Instructions for attaching foot cushions to the sound bar.
Instructions for assembling and attaching the sound bar stand.
Safety precautions and steps for wall mounting the sound bar.
Information on screw types and sizes for wall mounting.
Steps for attaching the wall mount angle to the wall.
Steps for aligning and securing the sound bar to the wall mount.
Using safety wires to prevent the sound bar from falling.
Notes on speaker placement and front panel non-removability.
Warning about changing installation direction when the unit is on.
Instructions for placing the sound bar system using the stand.
Important note about unplugging AC power before making connections.
Instructions for connecting the sound bar to a TV via HDMI, including ARC support.
Connection for HDMI TV without ARC (Audio Return Channel).
Methods for connecting the TV to the sound bar using audio cables.
How the unit powers on via HDMI CEC or audio signal detection.
Explanation of ARC function and requirements for PCM audio.
Note that volume is controlled by the TV.
How the unit automatically goes to stand-by mode.
Common problems like no sound, noise, power issues, and volume control.
Handling condensation due to temperature changes.
Troubleshooting steps for external interference or incorrect operation.
Power source, consumption, output power, and input terminals.
Type, dimensions, impedance, and weight of the soundbar.
Type, dimensions, impedance, and weight of the subwoofer.
