EasyManua.ls Logo

Sharp IG-GC2Y - Cleaning and Maintenance; Filter; Main Unit

Sharp IG-GC2Y
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
E-9
CLEANING AND MAINTENANCE
FILTER
Frequently as necessary
The lter must be cleaned regularly in order to maintain the ion density. Filter
soiling depends on the usage environment, so clean the lter frequently as
necessary. With frequent cleaning, Plasmacluster ions can be released ef ciently.
Open Close
Open Close
Main Unit Cover
Filter Cover
1 Rotate the main unit to t “ ”
on the main unit cover and “ ”
on the lter cover.
2 Pull the lter cover downward
and remove.
1
3
2
Filter
Filter
Dismantle the lters while
pushing in the direction of
arrow and remove dust
with a vacuum cleaner
• If the lter is dirty, simply
wash with water.
Do not press the vacuum cleaner strongly against the lter,
or the lter could be damaged.
If using synthetic kitchen detergent, rinse well to remove all traces
of the detergent. Also, be sure to dry the lter in the shade.
Dry the product in a shaded area so that water drops do not
remain in the gap between the lter cover and the lter.
Note
1 Attach the filter cover.
(Insert the lter to the upper
claw and lower claw)
2 Reattach the lter cover.
Filter Cover
Upper Claw
Filter
Lower Claw
Wipe with a dry soft cloth. <For Stubborn Dirt>
Use water and a mild detergent. And then, wipe with a wet cloth. Make sure to
dry out the main unit.
MAIN UNIT
Every month or more often if necessary
IG-GC2.indd 9IG-GC2.indd 9 6/1/2559 BE 2:44 PM6/1/2559 BE 2:44 PM

Related product manuals