Sharp JW Series User Manual

JW Series Computer Link SIO Driver
GP-Pro EX Device/PLC Connection Manual
46
 Device Setting
To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific
Settings ] of [Device/PLC Settings ].
When connecting multiple External Devices, you can click from [Device-Specific Settings] of [Device/PLC
Settings] to add the External Device which is available to set.
Retry
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Wait To Send
Use an integer from "0 to 255" to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
RI/VCC
Switches RI/VCC of the 9th pin.
It is necessary to change RI/5V by changeover switch of IPC when connect with IPC.
Please refer to the manual of the IPC for more detail.
Setup Items Setup Description
Series Select a series of the External Device
Station No. (Oct)
Enter the unit No. of the External Device with "01 to 77" (octal).
• When connecting the JW10 Series, enter with "0 to 77" (octal).
Setup Items Setup Description

Sharp JW Series Specifications

General

Brand	Sharp
Model	JW Series
Category	Control Unit
Language	English