Sharp JW Series User Manual

JW Series Computer Link SIO Driver
GP-Pro EX Device/PLC Connection Manual
48
 Device Setting
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings]. Touch the
External Device you want to set from the displayed list, and touch [Device Settings].
Timeout
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the
response from the External Device.
Retry
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Wait To Send
Use an integer from "0 to 255" to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
Setup Items Setup Description
Device/PLC Name
Select the External Device to set. Device name is a title of the External Device set with GP-
Pro EX. (Initial value [PLC1])
Series Display a series of the External Device
Station No. (Oct)
Enter the unit No. of the External Device with "01 to 77" (octal).
• When connecting the JW10 Series, enter with "0 to 77" (octal).
Setup Items Setup Description

Sharp JW Series Specifications

General

Brand	Sharp
Model	JW Series
Category	Control Unit
Language	English