Sharp JW Series

JW Series Computer Link SIO Driver
GP-Pro EX Device/PLC Connection Manual
64
Cable Diagram 5
Display
(Connection Port)
Cable Remarks
GP
*1
(COM1)
AGP-3302B (COM2)
IPC
*2
*1 All GP models except AGP-3302B
*2 Only the COM port which can communicate by RS-422/485 (4 wire) can be used.
) COM Port of IPC (page 6)
A
COM port conversion adapter by Pro-face
CA3-ADPCOM-01
+
Terminal block conversion adapter by Pro-face
CA3-ADPTRM-01
+
Your own cable
Cable length:
1000m or less
B Your own cable
GP
*3
(COM2)
*3 All GP models except GP-3200 series and AGP-3302B
C
Online adapter by Pro-face
CA4-ADPONL-01
+
Terminal block conversion adapter by Pro-face
CA3-ADPTRM-01
+
Your own cable
D
Online adapter by Pro-face
CA4-ADPONL-01
+
Your own cable
• Do not connect anything to Pins No. 2, 4, 8 and 12 on the External Device.
• Do not connect to Pins No. 14 and 15 on the External Device since voltage is +5V.