Need help?Do you have a question about the Sharp JW10 and is the answer not in the manual?
General| Brand | Sharp |
|---|---|
| Model | JW10 |
| Category | Controller |
| Language | English |
Provides a serial interface to the Sharp New Satellite JW10 Programmable PLC using the Computer Link.
Describes two physical connection types: MMI Port and 2-wire RS-422 Communication Terminals for the JW10.
Covers default PLC settings for MMI Port and 2-wire ports, including Data Length, Stop Bits, Parity, and Transfer Rate.
Drivers provide object-oriented parameters for users to select and modify addresses for building tags within WebAccess.
Outlines the process to configure a Sharp JW device, including setting up the SCADA node and comport.
Details the configuration of serial comport properties like Baud Rate, Data Bits, Stop Bits, and Parity to match PLC settings.
Explains how to add or modify device properties such as Device Name, Description, Unit Number, and Device Type.
Example of configuring an Analog Tag to read input data, specifying Tagname, Address, and Description.
Example of configuring a Digital Tag to write output data, specifying Tagname, Address, and Description.
To Next Page