How to troubleshoot a Sharp KH-6I35NS00-EU Hob with a blacked-out display?
If the Sharp Hob control card's display is blacked out and the hob or cooking zones cannot be switched on, it's likely due to a lack of power supply. First, check the household fuse for the appliance. If the fuse is fine, check whether there is a power cut by trying other electronic appliances.
What to do if the Sharp Hob controls are not working because of the child lock?
If the Sharp Hob controls are not working and the child lock LED is on, it indicates that the child lock is active. To resolve this, switch off the child lock feature.
Why does my Sharp Hob switch off and show 'F' on the display?
If your Sharp Hob switches off during use and an 'F' flashes on each display, it means the controls are either damp or have an object resting on them. Make sure to dry the controls thoroughly or remove any objects that may be on them.
What does the 'U' symbol on my Sharp KH-6I35NS00-EU Hob mean?
If the 'U' symbol lights up in the display of one of the cooking zones on your Sharp Hob, it indicates that either there is no pan on the cooking zone, or the pan you are using is unsuitable. To fix this, use a suitable pan.
Why does my Sharp KH-6I35NS00-EU keep switching off?
If the Sharp Hob switches off while in use, it could be because one of the cooking zones has been on for too long. You can start using the cooking zone again by simply switching it back on.
Why is my Sharp Hob making a clicking sound?
If your saucepans make noise or your Sharp hob makes a clicking sound during cooking, this is normal for induction hob cookware. It is caused by the transfer of energy from the hob to the cookware. There is no risk to your hob or cookware.
Why does the power level reduce when using two zones at 'P' or 9 on my Sharp KH-6I35NS00-EU Hob?
If power level 9 or 'P' is automatically reduced on your Sharp Hob when you select power level 'P' or 9 on two cooking zones on the same side simultaneously, it's because the maximum power level for the two zones has been reached. Operating both zones at power level 'P' or 9 would exceed the permitted maximum power level.
To Next Page
General
