Sharp KP-19S User Manual (English)

Questions and Answers:

R
Rebecca NortonAug 10, 2025
How to fix Sharp KP-19S when no power is supplied?
- S
  stevenlinAug 10, 2025
  If your Sharp Kitchen Appliance isn't getting power and the 'BOIL' indicator lamp isn't lighting up, here's what you can check: * Make sure the appliance is properly inserted into the outlet. * Ensure it's correctly connected to the inlet terminal. If these steps don't resolve the issue, it might be due to a disconnection, a blown-out component (possibly from heating without water or heater deformation), erroneous wiring, or a loose connection. In such cases, replacement or correction of the wiring might be needed.
C
craigcochranAug 15, 2025
What to do if Sharp Kitchen Appliances hot water leaks?
- P
  Paul GarciaAug 15, 2025
  If your Sharp Kitchen Appliance is leaking hot water, consider the following: * Ensure the appliance is placed on a level surface. * Do not fill water beyond the maximum level. Also, inspect the appliance for perforated parts, defective or deteriorated rubber joints, or disconnected joints. Correct the joint settings or replace the defective parts. Finally, check for and remove any foreign matter that may be causing the leak.
J
John LeonAug 20, 2025
What to do if “BOIL” indicator lamp lights up but water is not heated in Sharp Kitchen Appliances?
- R
  Regina HernandezAug 20, 2025
  If the “BOIL” indicator lamp lights up on your Sharp Kitchen Appliances, but the water isn't heating, it could be due to a disconnection. If this is the case, replacement of the faulty component is required.