Sharp KS-R23ST - INSPECTION AFTER ASSEMBLING; Temperature Test Procedure

12
Fig. 16
Thermostat rod
Outer pot hole
Switch leg ass’y
Center of outer pot
Lever to be swung
symmetrically
Stop ring
Switch leg ass’y
Thermostat rod
Fig. 17
Inner pot
Outer pot
Work bench
Fig. 14
Fig. 15
Temperature test
Based on the temperature testing method explained earlier ensure proper performance for “COOK” and “WARM”.
Thermostat ass’y
Outer pot ass’y
Inner pot
Heater plate ass’y
Inner pot to be normally in contact with