■ Changing V-CHIP BLOCK settings
Repeat steps 1 to 3 of Setting V-CHIP, then “INPUT
SECRET NO.” will be displayed.
–
– –
–
Input the 4-digit secret number by using Channel
Select; the V-CHIP select mode will be displayed.
Set the V-CHIP BLOCK again.
MPAA
TV GUIDELINES
CAN.ENGLISH RATINGS
CAN.FRENCH RATINGS
STATUS
■ Changing or clearing the SECRET NUMBER
If you forget the secret number, clear the secret number
as follows.
Upper control panel of the main unit
Repeat steps 1 to 3 of Setting V-CHIP, or 1 and 2 of
Canceling the V-CHIP BLOCK screen while V-CHIP
BLOCK is activated, then “INPUT SECRET NO.” will
be displayed.
Press and hold both CH (
) and VOL (+) on the main
unit simultaneously until the message “INPUT SECRET
NO.” blinks.
Press MENU to exit.
■ Activating V-CHIP BLOCK
● Setting STATUS
Repeat steps 1 to 4 of Setting V-CHIP.
Press '/" to select “STATUS”, and press ENTER.
MPAA
TV GUIDELINES
CAN.ENGLISH RATINGS
CAN.FRENCH RATINGS
STATUS
Press '/" to select “ON”, and press ENTER.
ON
OFF
A
• If “STATUS” is set to “OFF”, V-CHIP BLOCK will not be
activated.
Press MENU to exit.
■ Canceling the V-CHIP BLOCK screen while V-
CHIP BLOCK is activated
“V-CHIP HAS BEEN ACTIVATED” appears if you watch
a program with the same Program Rating data you
configured.
V
– CHIP HAS BEEN ACTIVATED
TV
– 14
DLSV
A
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if
“STATUS” is set to “OFF”.
Press MENU to display “INPUT SECRET NO.”.
–
– –
–
Input the 4-digit secret number by using Channel
Select; V-CHIP BLOCK is temporarily canceled. If you
input an incorrect secret number, “SECRET NO. IS
INCORRECT” is displayed. In this case, input the
correct secret number.
2
1
2
3
4
1
2
3
1
1
2
3
CH ( )
VOL (+)
MENU
LC13_15_20SH4U_E_P19-23.p65 05.4.26, 5:58 PM22
To Next Page
Loading...
Need help?
General
