To Next Page

To Previous Page

2008-03-14

LC-19S7E-BK LC-26S7E-BK LC-32S7E-BK

[3] SOFTWARE UPGRADE PROCEDURE

Connect to TV USB port to upgrade the software firmware.

Please follow the following step to upgrade the firmware.

1. Copy the software firmware (*.bin) to USB Disk.

2. Insert the USB Disk to TV USB port.

3. Unplug the AC cord.

4. AC power on

5. Reboot TV to update SW automatically. During upgrade FW the front LED will red light blink.

6. When FW upgrade is finished LED will stop blinking and keep at (Blue + red) color.

After finish upgrade process.

7. Remove USB disk from TV.

8. Turn AC Off then On to reboot TV

Check the software version is correct or not. (Menu /Installation/Current software)

Sharp LC-19S7E-BK User Manual

Questions and Answers: