Sharp LC-19SB14U - Page 28

28
LC-19SK24U/U-W
LC-19SB24U/U-W
LC-19SB14U
LC-19D44U
2.2.2.4 “Add” Flash ROM
Setting finish.
2.2.2.5 Update firmware:
1
. Connect M2 writer to LCD’s 20PIN port which near INPUT4 terminal, use convertor1
2
. Plug AC cord, make sure power indicator on.
3
. Run PD308SDI in start menu.
Then choose OK.
19K24U P18-57.indd 28 2007-8-15 15:30:40