Sharp LC-19SB14U - Page 30

30
LC-19SK24U/U-W
LC-19SB24U/U-W
LC-19SB14U
LC-19D44U
6
. Wait about 30 seconds, it up to 100%
7
. Shut down PD308SDI.
8
. Unplug AC cord and 20Pin connector.
3. MPEG2 module software version upgrade
Install soft in CD-ROM : WATCHPOINT-EJW\Disk1\SETUP.EXE
USB Driver: CD-ROM folder “USB Driver”.
19K24U P18-57.indd 30 2007-8-15 15:30:41