EasyManuals Logo

Sharp LC-22LE510K User Manual

Sharp LC-22LE510K
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
English - 2 -
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is tted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked
ASA
or and of the same rating
as above, which is also indicated on the pin face of the plug, must be used.
Always re t the fuse cover after replacing the fuse. Never use the plug without the fuse cover tted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the
mains plug and t an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed
of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 5A socket outlet, as a serious
electric shock may occur.
To t an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured
black.
The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured
red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug.
Before replacing the plug cover make sure that:
If the new tted plug contains a fuse, its value is the same as that removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
00_MB60_[GB]_1910UK_IDTV_PVR_BRONZE17_22942LED_YPBPR_ROCKER_10072632_50186842_td01.indd 200_MB60_[GB]_1910UK_IDTV_PVR_BRONZE17_22942LED_YPBPR_ROCKER_10072632_50186842_td01.indd 2 06.07.2011 17:31:1506.07.2011 17:31:15

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-22LE510K and is the answer not in the manual?

Sharp LC-22LE510K Specifications

General IconGeneral
Screen shape-
Response time- ms
Display diagonal22 \
Display brightness- cd/m²
LED backlighting typeEdge-LED
Display diagonal (metric)55 cm
3DNo
Annual energy consumption31 kWh
Analog signal format systemNTSC, PAL, SECAM
Digital signal format systemDVB-T
Audio decodersDolby Digital, Dolby Virtual Speaker
RMS rated power5 W
Number of speakers2
HDMI version1.3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product colorBlack
Heavy metals freePb (lead)
Panel mounting interface75 x 75 mm
Power consumption (off)0.01 W
Power consumption (standby)0.5 W
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)149 mm
Height (with stand)377 mm
Weight (with stand)4350 g
Depth (without stand)35 mm
Width (without stand)535 mm
Height (without stand)353 mm

Related product manuals