EasyManuals Logo

Sharp LC-26S7E-BK User Manual

Sharp LC-26S7E-BK
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
LC-19S7E-BK LC-26S7E-BK LC-32S7E-BK
48
  LVDS/TTL Panel Interface
Supports 8-bit dual link LVDS up to SXGA(1280x1024) / WXGA+(1440x900)
Supports 8-bit single TTL panel
Supports 2 data output formats: Thine & TI data mappings
Compatible with TIA/EIA
With 6/8 bits options
Reduced swing for LVDS for low EMI
Supports flexible spread spectrum frequency with 360Hz~11.8MHz and up to 25% modulation
  Integrated Micro Controller
Embedded 8032 micro controller
Configurable PWM’s and GPIO’s
Low-speed ADC inputs for system control
SPI bus for external flash
Supports external MCU option controlled through 4-wire double-data-rate direct MCU bus
  External Connection/Component
SD/MMC/MS/MSPro card reader interface to support JPEG playback
Two USB controllers (1.1 OTG and 2.0 host) with the flexibility for connecting external storage devices or PictBridge
16-bit data bus for external frame buffer (DDR DRAM)
All system clocks synthesized from a single external clock
1.2. U6102 (TPA3124D2PWPR)
Description
The TPA3124D2 is a 15-W(per channel);efficient,class-D audio power amplifier for driving stereo speakers in a single-ended configuration;or a
mono speaker in a bridage-tied-load configuration .The TPA3124D2 eliminates the need for an external heat sink when playing music.
The gain of amplifier is controlled by two gain select pins.The gain selections are 20.26.32and 36dB.
The patented start-up and shutdown sequences minimize pop noise in the speakers without additional circuity.
Features
10-W/Ch Into a 8-Ω Load From a 24-V Supply
15-W/Ch Into a 4-Ω Load From a 22-V Supply
30-W/Ch Into a 8-Ω Load From a 22-V Supply
Operates From 10V to 26V
Can Run From +24V LCD Backlight Supply
Efficient Class-D Operation Eliminates Need For Heat Sinks
Four selectable,Fixed-Gain Settings
Internal Oscillator(No External Components Required)
Single-Ended Analog Imputs
Thermal and Short-Circuit Portection With Auto Recovery
Space-Saving Surface Mount 24-Pin TSSOP Package
Advanced Power-Off Pop Reduction
Applications
Flat Panel Televisions
DLP TVs
CRT TVs
Powered Speakers
1.3. U1503 (TMDS261)
Description
The TMDS261 is a two-port digital video interface (DVI) or high-definition multimedia interface (HDMI) switch that allows up to two DVI or HDMI
ports to be switched to a single display terminal. Four TMDS channels, one hot-plug detector, and a digital display control (DDC) interface are
supported on each port. Each TMDS channel supports signaling rates up to 3 Gbps to allow 1080p resolution in 16-bit color depth.
The TMDS261 provides an adaptive equalizer for different ranges of cable lengths. The equalizer automatically compensates for intersymbol
interference [ISI] loss of an HDMI/DVI cable for up to 20 dB at 3 Gbps
Features
2:1 Switch Supporting DVI Above 1920 × 1200 · 64-Pin TQFP Package: Pin-Compatible With and HDMI HDTV Resolutions up to 1080p With
TMDS25116-bit Color Depth · Robust TMDS Receive Stage That Can Work
Designed for Signaling Rates up to 3 Gbps With Non-Compliant Input Common-Mode
HDMI1.3a Spec Compliant HDMI Signal
Adaptive Equalization to Support up to 20-m HDMI Cable
TMDS Input Clock-Detect Circuit · High-Definition Digital TV

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-26S7E-BK and is the answer not in the manual?

Sharp LC-26S7E-BK Specifications

General IconGeneral
Game modeNo
Teletext functionYes
Display diagonal26 \
Display brightness450 cd/m²
Display resolution1366 x 768 pixels
Display technologyLCD
Viewing angle, vertical150 °
Contrast ratio (typical)800:1
Viewing angle, horizontal160 °
RS-232 ports0
Headphone outputs1
SCART ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product colorBlack
Panel mounting interface200 x 100 mm
Power consumption (sleep)0.19 W
Power consumption (standby)0.21 W
Power consumption (typical)67.6 W
RMS rated power10 W
Tuner typeAnalog
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)239.8 mm
Width (with stand)657.8 mm
Height (with stand)491.1 mm
Weight (with stand)8400 g
Depth (without stand)91.6 mm
Height (without stand)448.4 mm

Related product manuals