9
Reset TV - This resets the menus to factory settings.
HDMI CEC* - Allows you to operate devices 
connected via HDMI with TV remote control.
  Auto standby* - Automatically turn on/
o  connected devices via HDMI CEC
  Device list* - Allows you to access devices menu and 
operate the menu using TV remote control.
  HDMI ARC* - Sends audio signal from terrestrial/satellite broadcast 
via HDMI to the AV receiver without using any additional audio 
cables, this functions is available only on HDMI 2 output.
* - HDMI CEC must be supported by connected device.
LED Status - Allows the user to switch the LED Power indicator light ON 
or  OFF, when the TV is being operated. (When this option is set to OFF 
the  LED Power indicator light will flash when the remote control is used)
Version Info - shows version of TV software
Store Mode* - switch ON/OFF shop demonstration mode
* - available only if store mode was selected during  rst time installation
7 Day TV Guide
TV Guide is available in Digital TV mode. It provides information about 
forthcoming programmes (where supported by the Digital channel). You 
can view the start and end time of all programmes and on all channels for 
the next 7 days and set reminders.
1.  Press
 [TV GUIDE]. The following 7 Day TV Guide will appear.
2.  Navigate through the menu using 
▲/▼/◄/►.
You can now:
Record selected TV channel and TV show by pressing the RED button.*
Set areminder by pressing GREEN.
View aprevious day by pressing YELLOW.
View the next day by pressing BLUE. 
[INFO] shows detailed 
information about the selected post
3.  Press 
[EXIT] to exit the 7 day TV Guide.
* - only for models with recording function
USB mode / Media player
USB mode o ers playback of various di erent types of content that you 
have saved on your USB Memory Stick. On switching to USB source the 
USB mode menu screen will appear. The content will be divided into Photo, 
Music, Movie and Text based on  le type.
1.  You can navigate through the menus using the scroll 
▲/▼/◄/►buttons. To con rm the item you wish to play/view press 
[OK]
 button.
2.  Select the drive you require. (If your drive only has 1 partition you will 
only see 1 item).
3.  You can now access the item. Press OK to view.
4.  While viewing you may control the item playback modes by using the 
remote control buttons or by invoking playback navigation menu and 
selecting on-screen buttons 
▲/▼/◄/► and [OK]
NOTE: USB extension cables are not recommended as 
they can cause a reduction in picture/audio quality and 
stoppages during play back of USB content.
USB Record - Digital mode*
Built into this television is aUSB record facility. This function is available in 
Digital mode when used in conjunction with acompatible USB memory 
stick or USB Hard drive. The bene ts of this are as follows:
•  Pause live TV and then playback, fast forward and rewind (up to live TV).
•  One button record, if you decide you want to record the current 
programme.
•  Easy programmable recording from the 7 day TV Guide
Due to the nature of the product, it is necessary to use ahigh speed USB 
memory stick (as the TV reads from and writes to the memory stick at the 
same time, some memory sticks may not be suitable).
Minimum Speci cation - USB Memory Stick
  Read Speed - 20 MB/s(Mega Byte Per Second)
  Write Speed - 6 MB/s(Mega Byte Per Second)
Pause Live TV (Time Shift) *
Pausing Live TV is very simple.
  Press the play/pause button and the television will pause and the live 
content will be recorded. To resume watching press play/pause again.
  Press fast forward to go forward in arecording (i.e. to skip adverts).
  Press fast rewind to go back in arecording 
(i.e. if you fast forwarded too far).
TIP: When you switch the TV to standby or change channel the Time Shift 
memory is wiped. To restart time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you 
are watching. To do this you need to press the [REC] button.
TIP: This television contains one TV tuner, therefore it can 
only record the channel you are watching or record one 
channel while the television is in standby mode.
NOTE: USB record function is only available in Digital TV mode. 
Due to copyright laws and illegal copying/recording it is not 
possible to record to/from any other input/output source.
* - only for devices with built in PVR function